Giga Nas Dongle Firmware Screen
♥ONTOTL WIRELESS DISPLAY DONGLE break through the small screen border of the phone and provide a powerful view of the big screen. No need download any software driver or APP and no need to switch among modes. Only 3 steps to start amazing visual journey, plug-connect-mirroring. WD Red 3TB NAS Hard Drive – 5400 RPM Class, SATA 6 Gb/s.
Software Installation
After installing your HDD(s), connecting it to your Ethernet and powering it up, within a minute or so the HDD LEDs will light up and you'll hear a beep. Once you heard the beep, it is ready to start configuring.
The device is now ready for setup. So you can access the NAS directly from your browser. I assume that you already connected the NAS towards your LAN network. With ASUSTOR software you can seek the device, but really, the easiest way to find out at what IP the NAS unit can be found at, is to browse your windows network and click on the icon to access it.
Download driveclone system recovery. My second and very easy suggestion is to install an app called FING on your smartphone. Once done, scan your network and within seconds you'll find what IP the NAS is located at. The NAS accepts a DHCP lease and should be present. If not then your last resort is to alternatively install the software supplied on the CDROM on your PC, it will detect and install the device. But really, you can scan your network (use your smartphone and install an app like Fing). Once your NAS unit is listed with an IP you can access the NAS by typing that IP into your browser. The screen shown above will now show.
Once you click next, the first likely thing the NAS will want to do is look if there is new firmware (ASUSTOR calls their operating system, ADM) available. You should update, the Firmware will automatically download and install, a process that takes a few minutes. Guys, update your firmware to the latest revision when an update is ready. These updates not only introduce new software, they apply security and vulnerability fixes as well. If you make your NAS publicly available on the web through HTTP / ssh / MariaDB (mysql) or FTP then always update.
Once your NAS has installed the firmware you'll hear a beep, then it will be rebooted and continue in your browser. If not, type in the local IP again e.g. 192.168.0.56 or whatever the NAS is located at. You can startup non-complicated 1-click install wizard, but if you have a bit of understanding about networking and NAS units, we do recommend a custom setup.
Typically I have one SSD installed for throughput testing, which always has been fast enough for Gigabit testing. However, with 10 GigE one, SSD is not fast enough. So today we'll be making use of three 240GB SSDs and set these up in RAID 5 mode. Though we're not sure the Marvell CPU can actually deal with extremely fast RAID5 writes sufficiently. You simply select RAID5 or your preferred RAID mode, select the storage units and then hit apply.
Giga Nas Dongle Firmware Screenshots
Once the RAID5 array has been created, you can immediately use it. However the SSDs will be initialized, that can take an hour (but again you can fully use the array already).
During setup insert a NAS unit name and password, and from there on you can follow a simple wizard to set up your device and configure it in your network.
The NAS will detect and set up DHCP lease if it can and it will retain that assigned IP. You could manually configure it as a fixed IP as well - as you do not want your NAS unit located at another IP after each router restart, totally up to you of course.
Security wise, we'd advise you to set up a new super-user account and kill the admin account if you connect the box to an open network, for now, admin with your own secure password will be just fine. On the topic of routers; should you like to have your public web-content and, say, FTP available on the internet, then in the router setup open up TCP ports 80 and 21 for IP 192.168.x.xxx / 10.0.0.xxx after which your router will redirect all in- and outgoing requests to the assigned IP. Once the automated setup is complete the unit will log in to the admin interface.
Giga Nas Dongle Firmware Screenplay
Once the NAS went through a couple of setup stages we can now log in based on the logon/password we just created. We recommend you to register an account at ASUSTOR as you will want to have access to their excellent suite of NAS APPs.
A quick check reveals that the NAS has successfully set up a 10 Gigabit connection towards our 10 Gigabit switch. That is a requirement, of course, your LAN infrastructure needs to be compatible. Over time when you need a new switch, simply already start thinking and upgrading towards 10 GigE devices. This will make the investment over time less painful for your wallet.
After the installation has finished, you can login, and you're welcomed by the ASUSTOR ADM user interface.